Wiring and Electronics 12/5/18—8/10/20

This section describes the electrical and electronic systems installed in this 1949 Hudson powered by a 2007 Chrysler 300C SRT-8 6.1L Hemi and NAG1 Transmission. It uses the factory Engine Management System, the factory engine wiring harness, various electronic modules and a universal 20 circuit wiring kit.
Start slideshow

Transmission Control

2 images

PCM

The engine wiring harness terminates at the three NGC connectors on the factory PCM (the fourth is blank, only used for TCM of RLE trans) and the Chassis…

2 images

The Front Control Module and the Power Distribution Module are not used, so the wiring to these modules has been stripped out. The unused circuits that branch…
The firewall brace covers the wiring. The heater tap has also been fitted to it.